What is the cutting tolerance?

Cut dimensions are held within plus or minus 10 millimetres. The exact tolerance is stated on each product page.

Can I get a material certificate?

Yes. The certificate of conformity is available for every reference and can be downloaded from your order once it has shipped.

Can bars be bent to my drawings?

Bending and prefabricated cages are quoted by your agency from your reinforcement drawings.

Select required criteria

0/0 Selected

Select to view exact matches.

Please select required criteria to show results

0/0 filter selected

Choosing within this range

Every reference of this range states its diameter, spacing and format. Two points help you pick the right one.

Reading a mesh reference

A reference gives the wire diameters and spacings in both directions, then the sheet format. The steel section per metre follows from it.

Overlap and cover

Overlap adjacent sheets by at least two meshes and keep the reinforcement on spacers so the concrete cover required by the drawings is respected.

Frequently asked questions

What our customers ask before ordering reinforcement.

Concrete welded mesh

Thanks to their good adhesion to concrete, welded mesh allows either their structures to be lighter and quickly ready for use (surface mesh), or their structures to retain their solid characteristics (structural lattice).

Select required criteria

0/0 Selected

Select to view exact matches.

Please select required criteria to show results

0/0 filter selected